Sindara Steel Co.,Ltd
The spirit of contract is what our company has always adhered to, and we serve our global customers professionally and attentively!
Add to Cart
Description
An elbow is a pipe fitting which is used as a connection point between two lengths of pipes to produce a change in the direction of flow in the pipe, usually at an angle of 90°, 45° or 180°. Elbows are also commonly referred as bends, and are available in a range of materials such as stainless steel, carbon steel, alloy steel, nickel alloys, duplex, and cupro nickel.
Also known as 90° bends, 90° elbows are manufactured as SR (Short Radius) elbows and LR (Long Radius) elbows. 45° elbows are typically made as LR (Long Radius) elbows.
The long radius elbows have a center to end distance that is 1.5 times the NPS in inches (R=1.5D), while the short radius is equal to the NPS in inches (R=1.0D).=Short radius elbows are generally used in tight areas, and long radius elbows are used when space is available and flow is more critical. We can also manufacture and supply carbon steel elbows and stainless steel elbows in non-standard size angles such as 60°, 100°, 120° or 150°.
The ends may be machined for butt welding, threaded (usually female), or socketed, etc. When the two ends differ in size, the fitting is called a reducing elbow or reducer elbow.
Pipe Elbows Specifications:
| Nominal pipe size | Outside Diameter at Bevel | Center to End | Center to Center | Back to Faces | ||||||
| 45°Elbows | 90°Elbows | 180°Return | ||||||||
| H | F | P | K | |||||||
| DN | INCH | Series A | Series B | LR | LR | SR | LR | SR | LR | SR |
| 15 | 1/2 | 21.3 | 18 | 16 | 38 | - | 76 | - | 48 | - |
| 20 | 3/4 | 26.9 | 25 | 16 | 38 | - | 76 | - | 51 | - |
| 25 | 1 | 33.7 | 32 | 16 | 38 | 25 | 76 | 51 | 56 | 41 |
| 32 | 11/4 | 42.4 | 38 | 20 | 48 | 32 | 95 | 64 | 70 | 52 |
| 40 | 11/2 | 48.3 | 45 | 24 | 57 | 38 | 114 | 76 | 83 | 62 |
| 50 | 2 | 60.3 | 57 | 32 | 76 | 51 | 152 | 102 | 106 | 81 |
| 65 | 21/2 | 76.1(73) | 76 | 40 | 95 | 64 | 191 | 127 | 132 | 100 |
| 80 | 3 | 88.9 | 89 | 47 | 114 | 76 | 229 | 152 | 159 | 121 |
| 90 | 31/2 | 101.6 | - | 55 | 133 | 89 | 267 | 178 | 184 | 140 |
| 100 | 4 | 114.3 | 108 | 63 | 152 | 102 | 305 | 203 | 210 | 159 |
| 125 | 5 | 139.7 | 133 | 79 | 190 | 127 | 381 | 254 | 262 | 197 |
| 150 | 6 | 168.3 | 159 | 95 | 229 | 152 | 457 | 305 | 313 | 237 |
| 200 | 8 | 219.1 | 219 | 126 | 305 | 203 | 610 | 406 | 414 | 313 |
| 250 | 10 | 273.0 | 273 | 158 | 381 | 254 | 762 | 508 | 518 | 391 |
| 300 | 12 | 323.9 | 325 | 189 | 457 | 305 | 914 | 610 | 619 | 467 |
| 350 | 14 | 355.6 | 377 | 221 | 533 | 356 | 1067 | 711 | 711 | 533 |
| 400 | 16 | 406.4 | 426 | 253 | 610 | 406 | 1219 | 813 | 813 | 610 |
| 450 | 18 | 457.2 | 478 | 284 | 686 | 457 | 1372 | 914 | 914 | 686 |
| 500 | 20 | 508.0 | 529 | 316 | 762 | 508 | 1524 | 1016 | 1016 | 762 |
| 550 | 22 | 559 | - | 347 | 838 | 559 | Note: 1. Do not use the figures in the parenthesis as far as possible 2. Please first select A series. | |||
| 600 | 24 | 610 | 630 | 379 | 914 | 610 | ||||
| 650 | 26 | 660 | - | 410 | 991 | 660 | ||||
| 700 | 28 | 711 | 720 | 442 | 1067 | 711 | ||||
| 750 | 30 | 762 | - | 473 | 1143 | 762 | ||||
| 800 | 32 | 813 | 820 | 505 | 1219 | 813 | ||||
| 850 | 34 | 864 | - | 537 | 1295 | 864 | ||||
| 900 | 36 | 914 | 920 | 568 | 1372 | 914 | ||||
| 950 | 38 | 965 | - | 600 | 1448 | 965 | ||||
| 1000 | 40 | 1016 | 1020 | 631 | 1524 | 1016 | ||||
| 1050 | 42 | 1067 | - | 663 | 1600 | 1067 | ||||
| 1100 | 44 | 1118 | 1120 | 694 | 1676 | 1118 | ||||
| 1150 | 46 | 1168 | - | 726 | 1753 | 1168 | ||||
| 1200 | 48 | 1220 | 1220 | 758 | 1829 | 1219 | ||||
Standard
| ASTM A234 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service |
| ASTM A420 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service |
| ASTM A403 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
Process
